Address: 109,1st Floor,
Coover Building,
1st Pariswada Lane,
C.P.Tank,Mumbai.400 004
Tel:
91 (22) 2386 7806
Email: accounts@jvsipl.com
URL: www.jvsipl.com



STAINLESS STEEL SCRAP

         » Read more...

304 series scrap

Shall consist of clean 18-8 type stainless steel clips and solids containing a minimum 8% Ni, 17% Chrome, and have a maximum of 0.50% Molybdenum, 0.50% Copper, 0.045% phosphorous, and 0.03% sulfur, and otherwise free of harmful contaminants, particulars concerning physical description, grading, additional analysis, and prepration to be agreed upon between buyer & seller.

Top
316 series scrap

Shall consist of clean 18-8-2 type stainless steel clips and solids containing a minimum 10% Ni, 16% Chrome, 2% molybdenum, and have a maximum of , 0.50% Copper, 0.045% phosphorous, and 0.03% sulfur, and otherwise free of harmful contaminants, particulars concerning physical description, grading, additional analysis, and prepration to be agreed upon between buyer & seller.

Top
410 series scrap

Type 410 exhibits good corrosion resistance to atmospheric corrosion, potable water, and to mildly corrosive chemical environments because of the ability to form a tightly adherent oxide film which protects the surface from further attack.hall consist of carbon 0.15%,magnese 1%,Phosphorous 0.040%,Sulfur 0.030%,Silicon 1%,Chromium 11-13%. 430 can readily be fabricated by cold working. Typical operations include bending, forming, deep drawing and upsetting.

Top
430 series scrap

Type 430 is a low-carbon plain chromium ferritic stainless steel.Shall consist of carbon 0.12%,magnese 1%,Phosphorous 0.040%,Sulfur 0.030%,Silicon 1%,Chromium 16-18%,Nickel 0.5%. 430 can readily be fabricated by cold working.

Top
201 series scrap

Steels with Cr-Mn-Ni-N composition were called 200 Series of Stainless Steel. Shall consist of carbon 0.15%,magnese 7.50%,Phosphorous 0.060%,Sulfur 0.030%,Silicon 1%,Chromium 16-18%,Nickel 3.5-5.5%, Nitrogen 0.25%.The physical and mechanical properties are quite compatible. 200 series also has additional component of Carbon, which gives higher effectiveness to the austenitic nature of Stainless Steel.